GPSC PN
Availability
Sale Ends
Notify Me
Lightsaver Max Portable Solar Charger Specifications:
- Battery: 18000mAh (Lithium-ion)
- Power In: Solar / USB-C / 12V
- Power Out: Dual USB (2.5A, 5V)
- Solar Charge: 6-8 hours full sun
- Wall Charge: 3-4 hours (12V) 6-7 hours (USB-C) 8-10 hours (USB)
- Dimensions (in)
- Rolled: 13.5Â x 2.5
- Unrolled: 13.5Â x 34.5
- Dimensions (mm)
- Rolled: 342.9Â x 63.5
- Unrolled: 342.9 x 876.3
In the Box:
- Cables included:
- USB-A to USB-C Cable,
- 12V Input Charging Cable,
- 12V Output Cable
- The LightSaver Max collects energy from the sun when available, storing it in the internal battery. That energy is then available to charge a USB or 12V device anytime, eliminating the need to leave your device out in the sun. The LightSaver Max can also be charged using USB or 12V inputs if the solar panel is fully rolled up. A second LightSaver Max or another PowerFilm Solar panel (30W maximum) can be connected to the 12V input to increase solar charging speed (charge time is between 2-3 hours with an additional 30W of solar).
- Single button press - Turns the outputs on, allowing the LightSaver Max to charge devices. Outputs will stay enabled until the system is shut off, or about 90 minutes have passed with no load on the outputs. If the LightSaver Max is fully discharged, it will disable the outputs. This protects against draining a device’s battery by turning it on and off, which is common in many other solar chargers.
- Double button press - Changes the state of the flashlight. With the flashlight turned off, the first double press will turn the flashlight on to the high setting, the second double press will change the flashlight to the low setting, and the third double press will shut it off.
- Press and hold - Turns off the LightSaver Max. After a press and hold, all LEDs on the outputs will be shut off, indicating the unit has been turned off.