100% Canadian

All prices are in CDN dollars.

1-800-585-9331

GPSC PN
Availability
Sale Ends
Notify Me

Icom IC-718 Specifications:

General
Frequency Coverage*1
Rx
0.030–29.999999 MHz*1
Tx
1.800– 1.999999 MHz*2 3.500– 3.999999 MHz*2 7.000– 7.300000 MHz 10.100–10.150000 MHz 14.000–14.350000 MHz 18.068–18.168000 MHz 21.000–21.450000 MHz 24.890–24.990000 MHz 28.000–29.700000 MHz *1 Guaranteed range: 0.5–29.999999 MHz *2 varies according to version
Mode
USB, LSB, CW, RTTY (FSK), AM
Number of channels
101 (99 regular, 2 scan edges)
Frequency resolution 1 Hz
Frequency stability
Less than ±200 Hz from 1 min. to 60 min. after power ON. After that rate of stability less than ±30 Hz/hr. at +25˚C (+77˚F). Temperature fluctutatuions 0˚C to +50˚C (32˚F to +122˚F) less than ±350 H
Power supply requirement
13.8 V DC ±15 % (negative ground)
Current drain (at 13.8 V DC):
TX (Max. power): 20.0A RX (Max. audio/standby): 2.0A/1.3A
Operating temperature range
–10˚C to +60˚C; +14˚F to +140˚F
Antenna connector SO-239 (50 Ω)
Dimensions (W×H×D; Projections not included)
240×95×239 mm
ACC connector 13-pin
REMOTE connector 2-conductor 3.5 (d) mm (1⁄8″)
Weight (approx.)
3.8 kg; 8 lb 6 oz
Transmitter
Output power
SSB, CW, RTTY: 2–100 W AM: 1–40 W
Modulation system SSB : Balanced modulation AM : Low level modulation
Spurious emissions *spurious freq.; below 30 MHz
Low level modulation –50 dB, above 30 MHz: –60 dB
Unwanted sideband More than 40dB
Carrier suppression
More than 50dB
Microphone connector 8-pin connector (600Ω)
KEY connector 3-conductor 6.5 (d) mm (1⁄4″)
SEND connector Phono (RCA)
ALC connector Phono (RCA)
Receiver
Intermediate frequencies
64.455MHz, 455kHz, 15.625kHz
Receiver system
Double-conversion superheterodyne
Sensitivity(10 dB S/N)
SSB, CW, RTTY 0.16µV (1.8–29.999999 MHz)
AM 13 µV (0.5–1.799999 MHz) 2 µV (1.8–29.999999 MHz)
SQL sensitivity
Less than 5.6 µV (SSB)
Selectivity
More than
Less than
SSB, CW, RTTY
2.1 kHz/–6 dB
4.5 kHz/–60 dB
AM
6.0 kHz/–6 dB
20 kHz/–40 dB
Spurious and image rejection
More than 70 dB (1.8–29.999999 MHz)
Audio output power (at 13.8 V DC)
More than 2.0 Wat 10% distortion with an 8 Ω load
RIT variable range
±1200 Hz
PHONES connector
3-conductor 6.5 (d) mm (1⁄4″)
EXT SP connector
2-conductor 3.5 (d) mm (1⁄8″) /8 Ω

In the Box:

  • IC-718
  • Hand microphone
  • DC power cable
  • Spare fuses